De-blinding Ball Trays

Screening meshes can sometimes become blocked (or blinded), particularly when screening fine powders with a small aperture mesh. This can severely restrict product flow and reduce the throughput and processing ability of the system.

To counteract this problem, a simple ball tray can be installed below the screening mesh. The vibration of the machine causes the rubber balls to gently bounce against the screening mesh, knocking any blockages loose, and maintaining good product flow rates.

Screen Ball Tray

Ultrasonics

Ultrasonics are a more advanced and expensive alternative to ball trays, using high-frequency soundwaves to break up any blockages and maintain product flow.

ultrasonic screening 6

Tundishes & Distribution Cones

Tundishes and distribution cones are included to guide the flow of product onto the centre of the screening area.

The vibratory action of the screens, sieves and separators moves the product across the screening area in an outward spiral, so making sure the product lands on the centre of the screening area is essential to make the most effective use of the screening mesh.

Distribution cones can be fitted below the screening deck to ensure the product lands on the centre of all the screening decks when more than one deck is being used at a time.

Vibrecon Vibratory Separator Tundish

Rare Earth Magnets

Rare Earth Magnets are powerful magnets included to capture any ferrous material and remove it from the final screened product. The magnets are usually fitted into the outlet spout of a system, and can be removed for cleaning.

Rare Earth Magnetic

Flexible Connectors

Flexible connectors can be supplied to fit inlet and outlet spigots to eliminate the potential for product spillage and dust escaping into the surrounding environment.

Flexible Connectors

Covers

Our entire range of screens, sieves and separators can be fitted with enclosing covers. Covers are often included in designs to prevent any dust created by the vibration escaping into the surrounding environment, or to minimise the chances of foreign bodies and contaminants entering the product during the screening process.

The covers can also include:

  • Quick release mechanisms, reducing the time needed for maintenance and cleaning
  • Dust extraction ports to actively remove dust
  • Lock-off inspection ports to allow the screening process to be monitored without completely removing the covers
Vibraflo Top Cover

Stands & Castors

We are able to manufacture support stands and framework so our screens and sieves can be fitted into your production process. Screens and sieves can also be fitted with castors so the units can be moved in and out of place as needed.

Stands Castors

Earthing Wires

With powders flowing through the system, there can be a tendency for static charge build up. Earthing wires dissipate this build-up and eliminate the potential for static shocks, equipment damage and explosions.

Earthing Wire / Straps

Contact Us For More Information

Call our offices +44 (0) 1782 567770 Send us an Enquiry